The instructions for the air conditioning control panel are divided into chapters that describe in detail the functions and rules of use.
All air conditioning control panels are divided into infrared and wired. The latter type is used for industrial and semi-industrial installations. They transmit signals through thin special wires. One wired remote controls 3 to 8 air conditioners. How to set up the air conditioner remote is described in detail in the instructions.
Infrared remote controls work optimally up to 4 meters away.
At a distance of 4 to 8 meters, bright lighting can disrupt the infrared beam.
The instruction of the air conditioning control panel begins with a schematic representation of the device with the designation of its parts and buttons.
Main functions
The description of the air conditioner remote control states: to enter the main functions menu, the MODE button must be drowned. The display shows the modes:
- HEAT - air heats up to 30 degrees;
- Cool - the air is cooled to +15 - 18 degrees. To change the temperature, you must click on the arrows up or down;
- DRY - drainage of air. At a stable temperature, humidity decreases;
- Fan - adjusts the fan speed. Usually 3 speeds are given;
- AUTO - all parameters are set automatically. Sometimes this mode is activated by a separate button. It can also be launched from the air conditioner case, without a remote control;
- SLEEP - quiet work at night;
- SWING - A special mode of intensive ventilation of the room.
Battery Replacement Rules
In the description of the air conditioner remote control, a separate section is devoted to the correct use of the device:
- It is necessary to change both batteries at once, install the same. In order for the remote control settings to not disappear, the replacement should be carried out as quickly as possible;
- With a long period of inactivity, it is advisable to remove the batteries from the remote control;
- With standard use, the batteries last about 12 months. Some models indicate the need to replace batteries. The fact that the batteries are weak is noticeable by the weakening of the brightness of the display and the slow reaction to commands;
- Do not attempt to recharge disposable batteries.
Remote control
- In order for the signal from the remote control to enter the receiving device, it is necessary to direct the LED to the air conditioner. Any physical obstacles interfere with the signal flow. Setting up the air conditioner remote, as indicated by the instructions, is not at all difficult;
- Keep the remote control safe from drops and getting wet;
- The remote control works at a distance of no more than 8 meters;
- If dust accumulates on the LED, it also interferes with the passage of the infrared ray. Therefore, the remote control must be periodically wiped with a dry cloth.
