Decryption and troubleshooting instructions for air conditioners Dantex

The content of the article:

Most air conditioners produced in recent years, regardless of power, have the option of finding errors for Dantex air conditioners. The system can start automatically or manually.

It can be started manually by specialists from the service center. Thanks to the diagnostic function, the master does not need to independently check all the nodes and circuits of the air conditioner. Each type of breakdown is encoded by a specific set of Latin letters and numbers or diodes blinking in a certain order and produces specific values. Most often, error codes for air conditioners are displayed on the display of the indoor unit or remote control. But for some models there is a light indication on the outdoor module of the system.

Self diagnosis

Dantex Air Conditioner
Dantex Air Conditioner

The self-diagnosis option detects a problem and informs about it. Error codes - this is the sequence or alphanumeric combination that is displayed on the displays.

The most common causes of Dantex air conditioning errors:

  • Failure of the temperature sensor of the indoor module;
  • Failure of the temperature sensor of the heat exchanger of the indoor module;
  • Malfunction of the fan motor of the indoor unit;
  • Burnout of the general board.

Error Codes

Each manufacturer assigns specific error codes to their products. Moreover, as a rule, these "branded" badges do not change from model to model.

Error codes on the display of the indoor unit

Error code What does this code mean?
E1 air conditioner error Dantex EEPROM violation
E2 Zero crossing error signal
E3 Dantex Air Conditioner Error The fan speed of the indoor unit is not controlled
E4 The overvoltage protection mode in the electric network has been switched on for the last 4 hours
E5 There is no contact with the control circuit of the open temperature sensor
E6 No contact with evaporator temperature sensor control circuit

Dantex air conditioners are manufactured taking into account all existing international standards. Although the manufacturer is still not very well known in the market, Dantex products are confidently gaining their customers.

The main success of the products of this company is a combination of the system of the best developments of world-famous factories and their own innovations. Compressors built into Dantex equipment are assembled at the most famous factories in Japan: Hitachi, Matsushita, Toshiba.

Industrial air conditioners are equipped with Daikin compressors - the best that the modern air conditioning market can offer. Going off the assembly line, air conditioners are thoroughly tested by special control services that exclude factory defects.

Heating

Ventilation

Sewerage