The content of the article:
Having carefully studied the error codes of the air conditioners General Fujitsu on the display, each user without the help of a specialist can eliminate minor problems.
If the air conditioner error code is displayed on the control panel General fujitsu EE, you must simultaneously press and hold for at least three seconds the buttons "energy saving" and "change mode". The error codes will be displayed on the monitor:
-
stop the equipment;
- Air Conditioner Error Scan General Fujitsu is started by simultaneously pressing the “master control” and “fan” buttons for two seconds;
- To stop scanning, press the start button.
Self test mode
If the remote control displays E, it is necessary to conduct a self-diagnosis of errors of air conditioners General Fujitsu.
It is necessary to stop the equipment, press the “temperature” button and hold for 5 seconds. Self-diagnosis has begun.
Error codes for air conditioners General fujitsu
Error code | What does it mean |
00 | No communication between indoor unit and control panel |
01 | No communication between indoor and outdoor modules |
02 | The temperature sensor measuring the temperature in the room is broken |
03 | Short circuit of the temperature sensor of the indoor unit |
04 | The temperature sensor of the indoor unit is disabled. |
05 | Damage to the temperature sensor of the indoor unit |
06 | No external heat exchanger connection |
07 | Short circuit of the external heat exchanger sensor |
08 | Not enough power |
09 | Condensate tank full |
0A | No contact with outdoor unit temperature sensor |
0V | Short circuit on the temperature sensor of the external module |
0С | The temperature sensor is not functioning |
0D | On the tube of the temperature sensor circuit |
0E | Too high pressure |
0F | Temperature tube breakdowns |
11 | No connection to compressor |
12 | Broken indoor unit fan |
13 | Main board not responding |
14 | There is no connection with the room temperature sensor. |
General Fujitsu Air Conditioner Error Indication
What does the conditioner error General fujitsu mean | Indication | |||
OPERATION | TIMER | AIR CLEAN or QUIET | ||
Connection failure | Between the outdoor and indoor unit | – | 2-3 blinks | – |
Temperature violation of the indoor unit | The temperature sensor is not working correctly in the room | 2 blinks | 2 blinks | – |
The heat exchanger temperature sensor is not working correctly | 2 blinks | 3 blinks | – | |
Outside temperature violation | The operation of the discharge pipe temperature sensor is incorrect | 3 blinks | 2 blinks | – |
The heat exchanger temperature sensor is not working correctly | 3 blinks | 3 blinks | – | |
The temperature sensor is not working correctly | 3 blinks | 4 flashes | – | |
Two-way valve thermistor failure | 3 blinks | – | 2 blinks | |
Three-way valve thermistor failure | 3 blinks | – | 3 blinks | |
Radiator Thermal Sensor | 3 blinks | 7 flashes | – | |
Compressor temperature sensor | 3 blinks | 8 blinks | – | |
Failure of the indoor unit monitoring system | Broken button | 4 flashes | 2 blinks | – |