Error designation for air conditioners lg
Modern company systems LG, which regulate the temperature in the rooms, are structurally quite complex, an air conditioner error lg can lead to malfunctions, the elimination of which will be quite expensive. Therefore, all air conditioners are equipped with a self-diagnosis device, capable of, in case of interruptions, block the operation of the air conditioner and display the cause of the malfunction on the indoor unit.
Various possible errors of the air conditioners are indicated by a certain sequence of flashing LEDs. Every three seconds, the diode flashes from one to ten times, the number of blinks is the code that has the decoding in the instructions that came with the product.
For example, if the air conditioner is turned off and the diode flashes eight times every three seconds, it is necessary to check the operation of the fan motor. Information about malfunctions greatly simplifies repair, and most importantly, it protects the entire system from serious damage that could have occurred if the air conditioner worked with malfunctions, which are reported by the error codes of the air conditioners of the lie.
If the diagnostic device detects several faults, the alarm occurs in the sequence of increasing the serial number. First, a fault is indicated with fewer blinks. After three seconds, the error codes of the air conditioners lg with a higher serial number are signaled. Then the sequence is repeated.
You will find a complete set of error codes below.
Troubleshoot A / C Error
It should be borne in mind that the diagnostic system is very sensitive and responds to deviations of any parameters provided by the instruction.
Including changes in the characteristics of the power supply network, power surges can be recorded as an air conditioner error lg, therefore, before starting to troubleshoot, the network readings should be measured and, if the indicators are consistent, the air conditioner should be turned on again. If the failure was caused by the power supply voltage, then after such a simple procedure, operation will resume, and error codes of the air conditioners of the LJ will not be displayed.
The diagnostic device through the error code indicates a malfunction, which significantly reduces the cost of repair, since there is no need to attract expensive devices and service center professionals to identify and eliminate the defect. To eliminate the detected error of the air conditioners, the knowledge and experience of specialists of a wide profile are enough.
