Japan corporation SANYO manufactures slit systems, semi-industrial and industrial air conditioners, chillers and multi-zone systems of the highest quality. SANYO products rank first in the world in sales. It is distinguished by high manufacturability and low energy consumption, environmental friendliness.
Characteristics of air conditioners SANYO
Wall-mounted split systems manufactured by the corporation are the most convenient type of HVAC equipment for housing, offices and shops. SANYO air conditioners are equipped with an air filtration system and a remote control. The operating mode can be set programmatically. Another plus is low energy consumption. Some models have a bright and memorable design that fits well into the modern interior.
Sanio semi-industrial air conditioners are designed for large areas. Internal modules of systems can be channel, ceiling, wall or cassette type. PAC i series - Sagno inverter air conditioners, in a matter of minutes will bring the room temperature to the required level without spending a lot of electricity. Subsequently, the temperature is maintained with an error of only half a degree. They are small in size and quiet.
Sanio duct air conditioners are equipment that serves several rooms at the same time. Work quietly and efficiently.
Instructions for air conditioners SANYO
SANYO split systems are charged with environmentally friendly R410A refrigerant and operate under the control of an inverter.
The instruction begins with a description of the features of this model of air conditioner Sanio and safety rules. The principle of operation of the device and the special options that are present in the heating and cooling modes are explained. The table shows the ranges of permitted temperatures when working in different modes.
The following is a description of all parts of the equipment, including indications on the scoreboard of the indoor unit. The chapter of the manual describes the use of the remote control and the icons on its display. Very detailed reports on the inclusion of various operating modes and special remote control options.
Remote control batteries should be replaced once every six months.
On the display of the remote control there is an indication of low charge. Schematically shows the process of replacing the batteries in the remote.
In the absence of batteries or a breakdown of the remote control, there is the possibility of manual control. On the bottom front of the indoor unit is a button that puts the Sagno air conditioner in automatic mode. The same button completely turns off the device.
Care of the air conditioner and timely cleaning of the filters will extend the life of the device and reduce energy losses. The third section of the SANYO air conditioner instruction manual, equipped with many pictures, tells how to do this correctly.
